Lumastream THEA 92 Bedienungsanleitung PDF herunterladen (Seite 2)

THEA 92 Speciﬁcations

Input

Output

System Protection

Safety and EMI/EMC

Environmental

Control Interface

Rated Input Voltage 120 to 277 Vac

Rated Input Frequency 50/60 Hz

Power Factor EN61000-3-2 @120 Vac 0.99 W/VA; @277 Vac 0.91 W/VA, 100% load typical

Input Current Total Harmonic Distortion @120 or 277 Vac 13% typical, 100% load

Rated Output Power 92 W max

Efciency Full load @120 Vac (no load on auxiliary output); 88% typical

System Power Cycle Delay 0.9 second typical

Output Current Tolerance +/-5 % of nominal

Auxiliary Voltage 12 Vdc @ 160 mA, less than 1% load/line regulation

Output Over voltage, over current, short circuit protection

Over Temperature Power supply will throttle back output current gradually when case

temperature reaches 85°C/185°F nominal.

Agency Approvals UL 8750 NEC Class 2 outputs, US only

Emissions ICES-003; FCC Title 47, Part 15, EN55022 Class A

EN61000-3-2 Harmonics Emissions, Class C

EN61000-4-4 Electrical Fast Transient, 1KV Criteria B

EN61000-4-5 Surge, 2KV Criteria B

EN61000-4-11 Voltage Dips, Interruptions, and Voltage Variations, according to

EN61547 and EN55024

Location Rating Dry/Damp Location

Operating Ambient Temperature -20°C to 50°C / -4°F to 122°F

Maximum Case Temperature T

=80°C / 176°F

Storage Ambient Temperature -40°C to 80°C/ -40°F to 176°F

Relative Humidity 5% to 95% noncondensing

Mean Time Between Failure

(MIL HDBK-217F)

>125,000 hours @ T case 70°C/158°F

Control Method Analog 0-10 Vdc, IEC 60929 Annex E Outputs 0.5 mA max or variable

0-10 Vdc Voltage Source; Class 2 outputs.

Loss of Analog Input Signal Outputs will go to 100% light intensity in less than 1 second

LSPS06 / THEA 92

1 2 3

Keine Kommentare

Lumastream THEA 92 Bedienungsanleitung Seite 2